---
title: Discover Devices on the Network
slug: bhdo-v1/discover-devices-on-the-network
createdAt: 2022-05-13T19:50:33.000Z
---

You can discover devices on the network by navigating to** DeviceHub **> **Device Discovery**. 

# Enable/Disable Device Discovery

You can enable and disable discovery of devices that are connected to your network. Use Device Discovery to discover which nodes are for edge devices.

To enable device discovery, navigate to the *Device Discovery* pane and toggle the switch to **ON **from a selected Ethernet interface.  

::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/tqD63FN6E0ngcUQXhilox_device-discovery-toggle.png" size="80" width="1191" height="484" caption="The toggle to enable device discovery" position="center" showCaption="true"}

- When enabled, The *Discovery mode* table drops down for the selected Ethernet Interface.
- When disabled, The *Discovery mode* table collapses for the selected Ethernet Interface and the connection is dropped.

:::hint{type="info"}
**Note**: The populated list includes a number of devices found and the last scanned indicator in the Ethernet interface header, indicating the last time the network was scanned.
:::

# Discover Devices on the Network

Depending on the enterprise, Belden Horizon Data Operations may become lost among the thousands of devices in the private network. You can use Belden Horizon Data Operations with VGA/HDMI to discover devices. 

## Belden Horizon Data Operations with VGA/HDMI

If the system is running normal Belden Horizon Data Operations, it can be discovered using TUI (Terminal User Interface) access. Connect a monitor to the Belden Horizon Data Operations IPC and the terminal shows the IP address of the device. See [Access the Terminal User Interface](docId:7h1DoIm8Okzu1wZwLE5Xo).