---
title: Add/View a Remote Network
slug: bhdm/addview-a-remote-network
createdAt: 2022-10-12T20:25:05.000Z
---

You can customize a remote network and configure its network peers.

- To add a new network, click the **Add **icon from [Edge Remote Networks](docId\:RNASIRtQbJJGUhkh-qpSy).
- To view/update a network, click the network name from [Edge Remote Networks](docId\:RNASIRtQbJJGUhkh-qpSy).

![](https://api.archbee.com/api/optimize/vAqK-046vdh4I0e1y9cfX/ddLLYYtMa-MSmbJR0yC8v_image.png "Network View")

\[1] Enter the network name. 

\[2] Select **IPv4 **or** IPv6**.

\[3] Enter the subnet mask.

:::hint{type="info"}
**Note**: An IPv4 address in the format `0.xxx.xxx.xxx/8` is not allowed due to RFC standards.
:::

- IPv4 Example: `xxx.xxx.0.0/24`
- IPv6 Example: `fd97:531a:ce26:ab11::/64`

\[4] Enter the gateway address. 

\[5] Review the capacity for activated devices on the network (available for Belden Horizon Data Manager version 2.16.0 and later).